IGS-9822DGP+ - 12 port managed switch
Industrial 12-port layer2 managed Gigabit Ethernet switch with 8x10/100/1000Base-T(X) ports and 2x100/1G/2.5GBase-X+2x1G/10GBase-X, SFP+ socket
- Support O-Ring(recovery time < 30ms) andMSTP(RSTP/STP compatible) for Ethernet Redundancy
- O-Chain allow multiple redundant network rings
- Supportstandard IEC 62439-2 MRP*note (Media Redundancy Protocol) function
- Support IPV6 new internet protocol version
- Support Modbus TCP protocol
- Support IEEE 802.3az Energy-Efficient Ethernet technology
- Provided HTTPS/SSH protocol to enhance network security
- Support SMTP client and NTP server protocol
- Support IP-based bandwidth management
- Support application-based QoS management
- Support Device Binding security function
- Support DOS/DDOS auto prevention
- IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
- Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management
- Support ACL, TACACS+ and 802.1x User Authentication for security
- Support 10K Bytes Jumbo Frame
- Syslog/SNMP Trap notification for warning of unexpected event
- Support DBU-01 backup unit device to quickly backup/restore configuration
- Web-based ,SNMP v1/v2c/v3, Telnet, Console (CLI), and Windows utility (Open-Vision) configuration
- Support Universal Plug ad Play Protocol
- Rigid IP-30 housing design
- DIN-Rail and wall mounting enabled
*NOTE: This function is available by request only
| Physical Ports | |
| 10/100/1000Base-T(X) with Ports in RJ45 Auto MDI/MDIX | 8 |
| 100/1G/2.5GBase-X with SFP port | 2 |
| 1G/10GBase-X with SFP port | 2 |
| Technology | |
| Ethernet Standards | IEEE 802.3 for 10Base-T |
| MAC Table | 32k |
| Priority Queues | 8 |
| Processing | Store-and-Forward |
| Packet Buffer | 32Mbits |
| Switch Properties | Switching latency: 7 us |
| Jumbo frame | Up to 10K Bytes |
| Security Featues | Device Binding security feature |
| Software Features | Redundant Ring (O-Ring) with recovery time less than 30ms |
| QoS | TOS/Diffserv supported |
| Network Redundancy | O-Ring |
| RS-232 Serial Console Port | RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1 |
| LED Indicators | |
| Power Indicator (PWR) | Green : Power LED x 3 |
| Ring Master Indicator (R.M.) | Green : Indicates that the system is operating in O-Ring Master mode |
| O-Ring Indicator (Ring) | Green : Indicates that the system operating in O-Ring mode Green Blinking : Indicates that the Ring is broken. |
| Fault Indicator (Fault) | Amber : Indicate unexpected event occurred |
| 10/100/1000Base-T(X) RJ45 Port Indicator (Upper) | Dual color LED: Green for 1000Mbps Link/Act indicator. Amber for 100Mbps Link/Act indicator, OFF for 10Mbps Link/Act |
| 1G/2.5GBase-X SFP Port Indicator | Green LED for Link/Act |
| 1G/10Gbase-X SFP Port Indicator | Green LED for Link/Act |
| Fault Contact | |
| Relay | Relay output to carry capacity of 1A at 24VDC |
| Reset Function | |
| Reset Button | < 5 sec: System reboot, > 5 sec: Factory default |
| Power | |
| Redundant Input Power | Dual DC inputs 12~48VDC on 6-pin terminal block |
| Power consumption (Typ.) | 19 Watts |
| Overload current protection | Present |
| Reverse Polarity Protection | Present |
| Physical Characteristics | |
| Enclosure | IP-30 |
| Dimensions (W x D x H) | 74.3 (W) x 125 (D) x 153.6 (H) mm (2.93 x 4.92 x 6.05 inches) |
| Weight (g) | 1078 g |
| Environmental | |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Operating Humidity | 5% to 95% Non-condensing |
| Regulatory Approvals | |
| EMC | CE EMC (EN 55024, EN 55032), FCC Part 15 B |
| EMI | EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A |
| EMS | EN 55024 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS),IEC/EN 61000-4-4 (EFT), IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP)) |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-31 |
| Vibration | IEC60068-2-6 |
| Safety | EN60950-1 |
| MTBF | 585191 hrs |
| Warranty | 5 years |
