Brand: ORing
TINJ-101-M12 EN50155 Industrial 1-port FET PoE Injector
In stock
SKU
TINJ-101-M12-xx
EN50155 Industrial 1-port FET PoE Injector with 30W output, M12 connector
Enquire Now
Enquire Now
- PoE+Injector for 1x10/100 Base-T(X)
- Fully compliant with IEEE802.3at/802.3af standard
- Auto protection for Over Voltage Power Input and over current output
- Supports Power Output up to 30Watts
- Supports Power wide Input range from 12Vdc to 57 Vdc
- Ultra-rugged enclosure M12 connector for toughest industrial usages
- Wall mounting enabled
| Physical Ports | ||
| 10/100 Base-T(X) with P.S.E. Ports in M12 Auto MDI/MDIX |
1 x M12 connector (4-pin M12 D-coding) | |
| 10/100 Base-T(X) Port in M12 Auto MDI/MDIX |
1 x M12 connector (4-pin M12 D-coding) | |
| Operating Voltage | ||
| Input Voltage | 50 ~ 57 VDC on 5-pin M12 A-coding | 12 ~ 57 VDC on 5-pin M12 A-coding |
| Output Power | 50V / 600mA, 30 Watts max. | 12V / 2500mA, 30 Watts max. |
| LED Indicator | ||
| Power Indicator | PWR / Ready: 1 x LED Green On: Power is on and functioning Normally. |
|
| PoE Indicators | 1 x LED Blue On: PoE Device Link Blue Blinking: Detecting PoE Device Blue Off : None PoE Device Detected |
|
| Protection | ||
| Short Circuit Protection | Present | |
| Over Load Protection | Present | |
| Physical Characteristics | ||
| Enclosure | IP-40 | |
| Dimensions (W x D x H) | 88.9 (W) x 40 (D) x 178.2 (H)mm (3.5 x 1.57 x 7.0 inch) | |
| Weight (g) | 385 g | 446 g |
| Environmental | ||
| Storage Temperature | -40 to 80°C (-40 to 176°F) | |
| Operating Temperature | -25 to 70°C (-13 to 158°F) | |
| Operating Humidity | 5% to 90% Non-condensing | |
| Regulatory Approvals | ||
| EMI | FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) | |
| EMS |
IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 |
|
| Shock | IEC60068-2-27 | |
| Free Fall | IEC60068-2-32 | |
| Vibration | IEC60068-2-6 | |
| Safety | EN60950-1 | |
| Warranty | 5 years | |
